La porta dei destini
Italiano
Apple BooksAugust 20, 1940
United States War DepartmentQuesta edizione è in un’altra lingua. Trova libri nella tua lingua ↗
Organization of textile industry 3 1. Object of inspection. — The object of the inspection of textiles, as for any other class of supplies, is — a. To insure that the article or material procured conforms in all respects to the specification and approved samples.
h. To protect the Government against loss through acceptance of defective or inferior articles or materials and to protect the rights of unsuccessful bidders.
c. To keep the contractor on the alert so that he will take special care in manufacture to have all material and workmanship up to specification requirements; to cooperate with the contractor, particularly with respect to interpretation of specifications and contractual requirements, and with regard to technological aspects of production.
d. To keep the contracting depot advised as to the operating conditions and the status of operations at the plant.
2. Types of inspection. — a. The following types of inspection are used in the inspection of textiles:
(1) Inspection during course of manufacture.
(2) Inspection at point of acceptance.
(3) Laboratory inspection.
b. Inspection dwnng coturse of mxmufactufrc. — Inspection during course of manufacture is re-sorted to when the nature of the material being purchased is such that it is difficult to determine full contract compliance from an examination of the finished product, or when manufacture involves inherent difficulties of a technological aspect, particularly in the case of supplies not ordinarily produced by the contractor. This type of inspection is accomplished by assigning one or more competent inspectors to the mill or mills involved.
c. Inspection at poi/rvt of acceptance, — Inspection at point of acceptance may be made either at contractor’s mill or at the receiving depot, depending upon the terms of the contract.
(1) Final inspection and acceptance at the point of manufacture requires the use of inspectors of the highest type, both in technical knowledge and in trustworthiness. Once an inspector has accepted supplies on behalf of the Government, the United States is bound by his actions, in the absence of gross negligence or fraud.
(2) Except in times of great emergency or where the exigencies of the situation are such as to require the shipment of fabrics direct to clothing manufacturers, textiles will usually be purchased on basis of final inspection and acceptance at the receiving depot, as this method assures maximum protection of the Government’s interest.
d. Ldboraiory inspection. — Inspection during the course of manufacture and inspection at point of acceptance must always be supplemented by laboratory inspection. Such essential determinations as weight, strength, color fastness, shrinkage, and fiber content can be determined only in the laboratory.
3. Organization of textile industry. — The textile industry is composed of a number of divisions which have very little in common, except weaving. The principal divisions of the industry, and the most important branches into which each is subdivided are own in the following table:
Cotton broker. Spinning. Weaving. Finishing Selling agent.
Wool grower. Wool broker. Top maker, ginning. Weaving. Finishing. Selling agent.
Chemical manufacturer. Weaving. Finishing. Selling agent.
Spinning. Knitting. Finishing. Selling agent.
Type required. How obtained. Instruction— 4. General. — a.
Republished by Liber Copia LLC for convenient study and reference on any device.